How are glass partitions fitted?
The first stage of fitting is to lay out and fix an Aluminium U channel around the perimeter of where the glass partition will be situated. The channel is fixed to the floor, walls and ceiling with flat headed screws. Once the U channel has been installed, the glass can either be lifted into the top channel and lowered into the botttom channel (lift and drop systems only) or the glass can be placed at an opening and slid along the U channel to the required position. Once the glass panels have been placed correctly with in the U channel, their level will be checked with a spirit level and packers may be used at the base of the glass to adjust and level them (these are not visible). All joints will then be filled with clear silicon to create the best visual finish, whilst also improving the strength and rigidity of the partition and signficiantly improves the sound proofing of the room.

How will the door within my partition my door open?
As all of our products are bespoke, we can adapt to your requirements. You can have a hold open or self – closing door, depending on what you would prefer. We can also provide lockable door handles, knobs, or standard handles in a variety of designs.

Can glass partitions be drilled into etc?
As the glass is toughened to ensure strength and durability, this means it cannot be drilled into, cut down or changed in anyway. However as all of our products are completely bespoke, we can pre-drill hole cutouts etc as long as we are advised of this prior to production. You can discuss any requirements you have in depth with the glazier when they conduct a site survey.

Are all of your glass panels rectangular?
No, all of our partitions are made specifically for each project, so we will produce notches etc within the glass for skirting boards or pillars etc to ensure the best fit.

Do I have to have clear Glass?
No, we can provide toughened glass in a clear, tinted bronze or tinted grey finish. We can also sandblast glass to a design of your choice. This can be the entire panel if you wish the glass to be semi – opaque for privacy, or in sections or patterns such as company logos etc. Or if you do not want a permanent design on the glass, we can also provide privacy film or stick on graphics. Please contact us for quotes or more information.